Sunday, 1 May 2011

How to recover hidden Files from Virus infected USB Pendrive

Now a days all the people use USB Flash drives like Pendrive, External Hard Disk and Many more. They all skipped DVD, CD and all optical Disc because it takes time to copy and it cannot be reused. So USB Pendrives are now with all people. I used to see all over my college, they hang USB pendrive in their necks. They carry Music, Movies, Datas in that. How USB flash drives improves as the mean while USB virus also increases along with that.
USB PENDRIVE VIRUS
If you have some nasty virus on USB drive that hide all your file in the drive? ie; hides your files and folders, creates exe file extensions of your folders and even corrupt your files. You can view these files by going to Tools>>Folder Options ..But the attributes of these files often stay unchanged even if you uncheck hidden attribute on file/folder properties.
Here i going to tell the Permanent Solution for recovering hidden files by Command prompt in windows operating system.

Step One:

Plug your USB Pendrive or External HDD or Memory Card which is Affected.

Step Two:

Go to Start -> Run-> Type CMD and Enter

Step Three:

Find the drive letter for the connected USB drive. For Example, I:
In command prompt, type I:
and Hit enter. Command Prompt will show I:/

Step Four:

Then type
attrib -s -h /s /d *.*
Make sure that you put space between each elements in the code.
and hit enter and wait for few seconds.
Check the Screen Shot of Above Steps:
Virus Remover Command Prompt
Now check your USB pendrive you can see your files are back in their locations. If you have any doubts Mention it on Comments.

How to hide text inside an image – Trick

Well, there are at times when you need to hide files from someone. Say, a text file which has some important data that you need to hide from everyone. So, this post will teach you how to hide text in an image.
Now, open notepad and give two lines space and then write anything you would like to make secret like given in the below image:

Hide text in picture 1
Now, take an image. I’ll use Tech2Hell’s logo.

Make sure to keep the image and text file in the same directory.
Now all you need is a command prompt window. So go to Start-> Run-> type “cmd” and press enter.
Navigate to the folder where your files are stored using “cd” command.
Now type the following command:

copy /b Image.jpg + Text.txt Output.jpg

Where, Image.jpg is the name of your image file and Text.txt is the name of your text file. Give a space between [Image.jpg + Text.txt] and [Output.jpg]
Output.jpg is the name of the file that will be created after you run this command.
Make sure that Image file name comes first and then the text file name after copy /b. Doing the opposite will not work.
Now, press enter and you’ll see an Output.jpg file that will get created in that same directory. You could now open the image, the image will open normally. Now the trick comes, open the Output.jpg file with notepad and you’ll see something like this:
Hide your text in image
Now, scroll down to the end and you’ll see the Text that you wanted to hide. It will look something like this:
Hide your Text in Image
The same thing can be done using a windows batch file.
And then you just found a way to hide your secret content in an image.
Now, lets do the same thing using a windows batch file:
To make a batch file:
Open notepad and write the following code:
copy /b Image.jpg + Text.txt Output.jpg
Where, Image.jpg is the name of your image file and Text.txt is the name of your text file. Give a space between [Image.jpg + Text.txt] and [Output.jpg]
Output.jpg is the name of the file that will be created after you run this batch file.
Save the notepad file as ImageHide.bat
Double click on the batch file to create Output.jpg. And, now you’ve also learnt to hide the text in image using the windows batch file.
Enjoy HIDING!

Laptop Hardware Breakdowns & Maintenance Tips


Laptop Hardware Breakdowns & Maintenance Tips


Laptop Cooling
Laptop Cooling
Manufactures build laptops for company sales and profits, they do not build laptops for longevity. Manufactures market/advertise these laptops for what consumers are looking for, which is style, lightweight and the convenience of mobility. What I'm trying to say here is,, laptops or any computer should not be mobile, for they will not last very long. But that's ok, because the manufactures also understands once you purchase a laptop you'll become "hooked on" the convenience of, the "need" of, and the mobility laptops. They also price the hardware components much higher on laptops, because they make more money when you buy a new laptop. For that is there sales, and company objective as I see it.

95%of the computer repairs that come to PCTech are laptop repairs:

  • Cracked, damaged, broken laptop LCD screens: Just in the last 3 months, approx 40 laptops came to PCTech for repair estimates from customers within a 20 mile radius of Augusta GA. I run a Google Adwords campaign, within the same radius of my area shows a high amount 200++ per month on average for the following search queries: "laptop screen", "laptop screen repair", laptop lcd replacement", "cracked laptop screen"
Reasons: Manufacture defect in LCD lid design (thin & lightweight), accidental damage, laptop mobility. Some of these laptops lcd lids are so lightweight, they flex, twist, torque the screen a bit when closing the screen lid by the corner only, resulting in a cracked screen = "accidental damage from the manufacture, not covered under warranty.
Other frequent reasons I hear from customers are: "stepped on it,, "sat on", "dropped it", "tripped over power cord pulling it off the table"

  • Failed Hard Drives: Hard drives in laptops I find also have a very high rate of failure. Just in the last month 15 laptops hard drives replaced. Maybe over 100 in the the year from laptops. Maybe 5 desktop hard drives replaced in the last year.
Reasons: Mobility of laptops, heat - lack of proper cooling within the tight compartment of the laptop, accidental damaged caused by user, lack of proper use & maintenance by the user. Hard drives do not like excessive HEAT, and hard drives do not like to be bumped, or dropped around. Another strike against laptops.

Anyone who owns a laptop who does not backup there important data on a regular basis, your setting yourself up for a big mess. Hard drive failure can happen at any time. Data recovery is not cheap, and is not guaranteed especially by cheap methods. Your data, your "stuff", your work, your whole life on that hard drive can be lost. 1 in 20 clients that I ask, say they do backups. If the data that you have stored on your computer is "so important to you",, why don't you back it up? Any hard drive will fail at one time or another, but laptops hard drives fail much quicker than desktop systems.

  • Laptop Motherboard Failures: Also a very high rate of failure over desktop systems.
Reasons: Manufacture design, excessive heat due to lack of adequate cooling, lack of proper use & maintenance by the user. Use a laptop on your bed, couch or even on your laptop blocks the very small cooling vents off on the bottom of laptop, which generates more heat inside of the laptop. The #1 reason for computer hardware failure is heat, the internal hardware/electronics do not like heat,,, another strike against laptops in general.

  • Internal DC Power Jack Connector: The worst design, very common weak spot on Windows based laptops
Reasons: The internal DC Power Jack Connector is a very small, very important part on the laptop, break it, and your laptop is out of action once the battery runs out. Normal use, or accidental damaged caused by one to many hard tripped over power cords, a hard yank on the power cord will eventually loosen or break the power connection internally on laptops. Resulting intermittent battery charging, nom power at all by the power adaptor at all, and a "no power on", dead laptop. The DC Jack is repairable at approx $135, full laptop dis-asembly is required, if the DC Jack has damaged or shorted out the motherboard..... your basically in for a new laptop.
A GREAT investment for any laptop owner, after repairing MANY DC Jacks on laptops, is a small device, and a that I designed to protect this fragile DC Jack on laptops can be found here: Laptop DC Jack Protector Cord Lock



Tips To Help Maintain Prolong The Life Of Your Laptop:
  • Be gentle, very gentle with your laptop, the electronics and hardware inside are very sensitive and delicate.

  • Do not sit your laptop on the floor, or chair, or couch, for you are asking for trouble! Do not drop your laptop, do not step on, sit on, or put anything on on top of the laptop. The screen is very delicate!

  • When closing the laptop, close the screen lid by the middle of the lid OR by both corners. Grabbing it by one of the corners can flex, torque, twist the lid and LCD screen panel inside, breaking, cracking the screen.

  • Do not use your laptop on a your bed or couch. The material conforms around the laptop bottom suffocating the laptop from cooling properly.

  • Do not leave your laptop on overnight, remember it does not cool properly to begin with.

  • Purchase a USB cooling pad for your laptop. This elevates the laptop, and has a USB cooling fan which circulates cool air to the bottom of the laptop, it's heat source.

  • Run a disk cleaner, defragment the hard drive periodically and keep it virus free. A virus infected, fragment hard drive has to work much harder, more work means more heat that the hard drive generates.

  • Do not spill anything on or close by your laptop, this will create major problems also. If you do, turn your laptop upside down, you want to get that liquid away from the inside of the laptop, and DO NOT TURN IT BACK ON. Take it in for service to have the laptop checked.

  • And last but not least, for your own sanity, and piece of mind, that "so important data" that you were going to back up, that you just have not got around to backing up, that you thought will be there forever and ever on your laptop............................. BACK YOUR IMPORTANT DATA UP today, before you regret it!




Tips When Looking For A New Laptop, If you Must:
  • Look for a laptop that is built sturdy, has some weight, that might take a bump or drop better then others. Do not let the light weight style, theme, the name, or the "bells & whistles" that attract you to the laptop fool you!

  • If the laptops are on display, and turned on, lift the laptop up, and put your hand on the bottom of the laptop. Does it feel hot just sitting there on there counter at idle speed on the underside, with nothing intensive running? While you are under there, check the cooling vents on the bottom, are they large enough to properly cool down that laptop? Run your hand over the keyboard from left to right, do you feel heat thru the keyboard area.............. if you do move on, you are not interested in that laptop.

  • Grab the LCD lid, is it so thin does it flexes the screen? Slowly close it by one of the corners, does the lid flex or twist a bit? If it does, move on, your not interested in that laptop either. Last Christmas I was in Walmart here in town, they had 8 laptops turned on, and on display, they were also chain lock to the counter for security. 5 of the 8 laptops they had on the display counter, turned on had cracked screens,,, I don't think they fell off the counter, I think they cracked from customers moving or closing the lid.

  • And if you find the right laptop, and they offer an extended warranty, find out what it covers, and take it for the maximum length.



In general, to sum it up here, laptops are VERY delicate machines that are not designed very well to really last. IF you take very good care of it, follow regular maintenance, follow user maintenance practices (keeping it cool), and keep your fingers crossed, it might just last you ok.
DC Jack Repair
DC Jack Repair

Tips on keeping your laptop cool

Recently when I turned on my laptop in a quiet room, someone ‘hilariously’ quipped “Are you taking off?”.  Unappreciated as his comments were, it did really bring home the fact that I could no longer tell the difference in sound between my laptop and my girlfriends hairdryer.  And it isn’t just noisy – my laptop no longer has the blue rubber cover over the Track Point stick – not because it fell off, but because it actually melted.  Clearly, something needed to be done…
A few people I spoke to recommended getting one of those cans of compressed air and blasting it in to the air outtake vent, but I reasoned that if I was going to do this, I might as well do it properly and take the thing apart.  I’ve written this like a step-by-step guide, but I don’t want to call it one because it is kinda patchy and incomplete.  Instead, consider it just a set of tips which might save you from making the mistakes that I made.
Warning: Anything you do based on this guide is at your own risk. You could permanently damage your laptop and could also void your warranty!


Tip 1: Find a suitable technical manual before taking it apart. This is pretty important.  If you don’t, you could end up doing what I did and remove screws unnecessarily – and even more importantly make sure that you…
Tip 2: Check to see if you will need to remove any heat sinks or anything else tricky. It is really worth checking this beforehand so that you don’t do what I did and have to spend 2 hours going out and buying some thermal paste in a rush having yanked the heat sink from my video chip.  I won’t try and explain how to replace the thermal paste or pad because there are plenty of other guides out there for that, and frankly, I’m not very good at it.
Tip 3: Remove the relevant components until you get good access to the air outtake vent. Obviously try not to remove anything unnecessary, but if you’re going to all this trouble you might as well do that best job you can.  Put the screws somewhere safe and in a manner which ensures you put them back in the right places.
Tip 4:  Remove all dust. It was at this stage that it became clear to me exactly what the problem with my laptop was.  The pictures below are extremely poor quality from my mobile, but hopefully if I tell you that the circled gray block is where you should only see a copper vent, you will get the idea.  It was literally a dam of dust , which was thick enough to stick together in a single strip when I pulled it away.
The wall of dust which stopped my processor from breathing
The wall of dust which stopped my processor from breathing
There will be variable amounts of dust all over the place, so at this point you may want to use a can of compressed air (available from hardware stores) or a small vacuum cleaner to remove as much as possible, including from the fans.  One ‘tip’ that I read somewhere is that you can damage the small fans if you make them spin too fast by blowing air into them – this could be complete rubbish, but there’s no harm in holding it still with your finger while you blast it with air.
Tip 5: Put everything back carefully. I guess this goes without saying, really.
That solved it for me, anyway.  Feel free to share any better tips with me.

G.Skill Flare 2000MHz CL7 DDR3 memory modules for AMD platform

G.Skill today launched the 2,000MHz CL7-9-7-24 1.65V 4GB (2GBx2) DDR3 kit with its latest Flare heatsinks, as the ideal performance partner for AMDs latest 6-core processors.
The G.Skill Flare series brings 2,000MHz to the world of AMD, with the incredible timing of CL7. It provides AMD enthusiasts the perfect choice of high-end memory to make the most of overclocking the latest AMD system.

The kit comes in 4GB (2x 2GB) module.

ASRock reveals Socket AM3+ CPU details

ASRock reveals Socket AM3+ CPU details According to ASRock, AM3+ CPUs may become unstable if plugged into an AM3 socket.
Motherboard maker ASRock has published a guide to AM3+ motherboards that not only lets slip a few details about AMD's new AM3+ socket, but also the CPUs that will fit in it.

One key concern, according to the guide, is the fact that a Socket AM3+ CPU fitted to a Socket AM3 motherboard ‘may not be stable enough to provide reliable computing.’

It seems that while Socket AM3+ processors should be backwards compatible with any Socket AM3 motherboard that has the necessary BIOS update, the reality might not be that simple.

ASRock provides some details on the reasons for this, pointing out that the new CPUs and sockets support a 3.4MHz ‘Serial VID’ rather than the 400KHz frequency currently used. According to ASRock, this provides ‘a faster link between CPU and power controller,' so that AM3+ motherboards 'can support better power management and power saving.’

The claims about the power-efficiency of the new socket and CPU are further reinforced by ASRock's use of a more efficient loadline design. However, this seems to be an ASRock-only technology, as the info site states that it's designed to not only ‘meet AMD’s requirements,', but also to provide an efficient power supply that will result in '11.8% better CPU power saving.’

According to ASRock's guide, the maximum electrical current required for Socket AM3+ CPUs will rise to 145A, compared with the 110A of AM3 chips. The company also says that the 32 per cent rise in current will be partnered with a 22 per cent decrease in signal noise.

Whether or not the increase in amperage will be met with an increase in TDP (Thermal Design Power) isn’t clear – if the voltage of the CPU goes down, the power draw could remain the same, as Volts x Amps = Watts. However, it looks as though ASRock will be using a modified mounting clip called the CCR (Combo Cooler Retention Module) to improve the cooling of the CPU’s power chokes by 5.4oC. However, it looks as though ASRock merely cut the sides off a standard square retention bracket to create the CCR, though, which is backed up by the claims that ‘the CCR is backward compatible with the old AM3/AM2+ CPU cooler as well.

ASRock details nine different motherboards – both ATX and micro-ATX in size – that sport the new Socket AM3+ CPU socket. Curiously, they all use current-generation AMD 8-series chipsets and 7- and 8-series Southbridges, so the new AM3+ CPUs don't look as though they're going to be accompanied by a new range of chipsets.

Were you expecting a new AMD chipset to accompany AM3+, or are you just looking forward to getting hold of some new AMD kit.

A five-way refresh from AMD

Not long after the debut of the Clarkdale lineup, AMD conducted a freshening up of nearly its entire desktop CPU range. This move was unusual in a couple of ways: because it involved the introduction of five new CPU models at once, and because each one of them represents only a 100MHz clock speed increase over the prior incumbent at the same price point. The update was broad but incremental, serving as a bit of a price cut and a minor performance boost.
Top row: Athlon II X2 255, Athlon II X3 440, Athlon II X4 635.
Bottom row: Phenom II X2 555, Phenom II X4 910e.
The case is not without some singular features, though, as Sherlock Holmes would say. In fact, this calls for us to bust out our table of the current processor types, like so:
Code name Key
products
Cores Threads Last-level
cache size
Process node
(Nanometers)
Estimated
transistors
(Millions)
Die
area
(mm²)
Penryn Core 2 Duo 2 2 6 MB 45 410 107
Bloomfield Core i7 4 8 8 MB 45 731 263
Lynnfield Core i5, i7 4 8 8 MB 45 774 296
Westmere Core i3, i5 2 4 4 MB 32 383 81
Deneb Phenom II 4 4 6 MB 45 758 258
Propus/Rana Athlon II X4/X3 4 4 512 KB x 4 45 300 169
Regor Athlon II X2 2 2 1 MB x 2 45 234 118
Athlon II X2 processors are based on the chip code-named Regor, a relative newcomer to AMD's lineup. Regor features two Phenom II-class processor cores, each with 1MB of L2 cache. Like other Athlon IIs, it has no L3 cache. Regor may not impress the ladies with its neck-snapping acceleration, but it's a relatively small chip that ought to draw power rather modestly and be cheap to produce. The Athlon II X2 255, for instance, has a healthy 3.1GHz clock speed, a 65W TDP, and a price tag of just 74 bucks—not a bad combo, all things considered.
We've picked up another code name in our table along the way, too: "Rana," used to denote Athlon II X3 chips based on the Propus silicon that powers the value quad-core Athlon II X4 chips. Why we need another code name for the same silicon with a core disabled is beyond me, but I think the answer has to do with the fact that additional code names cost nothing. And marketing people need something to do with their time. The logic seems to be: "Yeah, I used to be called Bart, before I lost my leg in 'nam and changed my name to Dexter."
Regardless of the code-name chicanery, AMD's value-oriented quad- and triple-core parts are a pretty savvy response to the excellent Core i3. AMD can't offer you Clarkdale-class computing power in two cores, but they can give you more cores at the same price—at the cost of some additional power consumption and heat production. The first five lines of the table below detail the new models AMD recently introduced.
Model Cores Base core
clock speed
Last-level
cache size
Black
Edition?
TDP Price
Athlon II X2 255 2 3.1GHz 2 x 1 MB L2 - 65W $74
Athlon II X3 440 3 3.0GHz 3 x 512 KB L2 - 95W $84
Athlon II X4 635 4 2.9GHz 4 x 512 KB L2 - 95W $119
Phenom II X2 555 2 3.2GHz 6 MB L3 Y 80W $99
Phenom II X4 910e 4 2.6GHz 6 MB L3 - 65W $169
Phenom II X4 965 4 3.4GHz 6 MB L3 Y 125W $195
We've tested four of the five new parts, including all of the Athlon II chips. The Phenom II X4 910e is a low-power version of the Phenom II with a 65W TDP. We haven't had time to run it through our full benchmark suite, but we have measured its power efficiency.
The one new model we've neglected, simply due to lack of time, is the Phenom II X2 555, a dual-core variant of the Phenom II that's also a Black Edition chip with an unlocked multiplier. We happen to think the Athlon II X3 and X4 processors are potentially more compelling, but if you want to get a feel for how the X2 555 might perform, we have a full set of results for its younger sibling, the X2 550. If you squint hard enough when reading our graphs, you won't be able to see the effect the extra 100MHz might have in the X2 555, anyhow.
I've included the Phenom II X4 965 in the table above because it represents the absolute top end of AMD's desktop CPU line—at only $195. AMD can't really ask any more than that given Intel's current performance dominance, and the situation has led to a very compressed product stack. AMD does offer a host of Athlon II and Phenom II processors at varying price points and clock frequencies, but the differences between them are fairly small. One thing you won't find in the new lineup: a Phenom II X3 processor. The triple-core options now appear to be confined to the Athlon II line, which probably makes sense under the circumstances.
Kicking it old school with LGA775
In response to CPU round-ups like this one, we often get requests for the inclusion of older processors, so folks can have a better sense of how an upgrade might serve them. Happily, this time around, we were able to test a couple of older processors as points of reference.
The newer of the two is the Core 2 Quad Q6600, which debuted just over three years ago at a very healthy price of $851. A 2.4GHz quad-core part based on 65-nm Conroe/Kentsfield silicon, the Q6600 became an enduring enthusiast favorite as its price dropped over time. I expect these CPUs are still at work in the systems of quite a few TR readers to this day. What's more, the Q6600's showing in single- and dual-threaded applications should essentially match that of the Core 2 Duo E6600, another popular pick from the same period.
If that's not old school enough for you, how about some Prescott action? The Pentium 4 670 is a single-core, 90-nanometer CPU clocked at a heady 3.8GHz. The P4 670 first hit the market nearly five years ago and was among the fastest desktop processors Intel offered at the time. Of course, that was a rather dark time for Intel, because AMD had an iron grip on the performance lead—especially in games. Still, the P4 670 was essentially state of the art, with reasonably competitive performance overall. In fact, it's pretty much as far back as we can reach in Intel's product stable while maintaining compatibility with our 64-bit operating system and applications. The applications in today's benchmark suite are much more broadly multithreaded, too, which could allow the P4 to take better advantage of its Hyper-Threading capability than it could back in the day.
Then again, I wouldn't get too worked up about the prospects for a dual-threaded, 3.8GHz CPU from five years ago if I were you.
We've used older Intel processors for comparison not to rub Intel's nose in a troubled period from its past, but because of the incredible track record of socket compatibility the firm has amassed during LGA775's run. Older motherboards weren't always capable of supporting newer CPUs, but we were able to drop both the Q6600 and the P4 670 in our new Asus G43 motherboard, boot up, and go to town. That enabled us to include these CPUs without the need to equip an additional test system.
Key contests to watch
Since we've tested such a broad range of processors, let me point out a few match-ups between Intel and AMD that are worth watching. The main one, of course, is our headliner, the contest between the Core i3-530 at $113 and the Athlon II X4 635 at $119. You know the outlines of that one. Pay careful attention to the contrasts in performance, power draw, and overclocking potential between these two processors, because I have a feeling this could be a close one, all told.
We don't often test CPUs as cheap as the Athlon II X2 255, which rings up at just 74 bucks. But we have this time, and we've also tested its direct rival from Intel at the same price, the Pentium E6500. The E6500 is based on an older Penryn (Core 2 Duo) chip running at 2.93GHz on a 1066MHz bus with just 2MB of L2 cache. Those specs ought to put it very close to the X2 255, which ticks away at 3.1GHz and has a total of 2MB of L2 cache, as well. Penryn's per-clock performance has generally been a little better than recent AMD processors, so the outcome is in no way assured. Both processors share the same 65W TDP rating.
I wish we had a Pentium G6950 to compare to the Athlon II X3 440, because those two chips are direct competitors. Perhaps we can snag one for testing next time around, but we at least have full results for the X3 440 now.

Related Posts Plugin for WordPress, Blogger...
Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | belt buckles